How to check the thickness of the PTFE lining in the tanks?

Nov 14, 2025

As a supplier of PTFE lined tanks, ensuring the proper thickness of the PTFE lining is crucial for the performance and longevity of the tanks. In this blog, I will share some effective methods on how to check the thickness of the PTFE lining in the tanks.

Understanding the Importance of PTFE Lining Thickness

PTFE (Polytetrafluoroethylene) is a high - performance polymer known for its excellent chemical resistance, non - stick properties, and low friction coefficient. In the context of tanks, a PTFE lining protects the tank substrate from corrosive chemicals, extends the tank's service life, and maintains the purity of the stored substances. However, if the lining thickness is not within the specified range, it can lead to premature failure, chemical leakage, and potential safety hazards.

Non - Destructive Testing Methods

Ultrasonic Thickness Gauging

Ultrasonic thickness gauging is one of the most commonly used non - destructive testing methods for measuring the thickness of PTFE linings. This method works on the principle of sending ultrasonic waves through the lining. When the waves encounter the interface between the PTFE lining and the tank substrate, they are reflected back. The time taken for the waves to travel to the interface and back is measured, and based on the known speed of sound in PTFE, the thickness of the lining can be calculated.

To perform ultrasonic thickness gauging, a trained operator first needs to clean the surface of the PTFE lining to ensure good contact between the ultrasonic transducer and the lining. A coupling agent, such as a gel, is then applied to the transducer to facilitate the transmission of ultrasonic waves. The transducer is placed on the lining, and the thickness reading is displayed on the gauge.

One of the advantages of ultrasonic thickness gauging is that it is non - invasive and can be used on both new and in - service tanks. However, it requires proper calibration and skilled operators to obtain accurate results. Also, factors such as the presence of air bubbles or inhomogeneities in the PTFE lining can affect the accuracy of the measurements.

PTFE Lined Measuring TankPTFE Lined Filter Housing

Eddy Current Testing

Eddy current testing is another non - destructive method suitable for measuring the thickness of PTFE linings on conductive substrates. This method involves inducing eddy currents in the conductive substrate using an alternating magnetic field generated by a probe. The presence of the PTFE lining affects the flow of these eddy currents, and the changes in the eddy current pattern are detected by the probe. Based on these changes, the thickness of the PTFE lining can be determined.

Eddy current testing is relatively fast and can be used for on - site inspections. It is also sensitive to changes in the lining thickness and can detect thin areas or defects in the lining. However, it is mainly applicable to conductive substrates, and the accuracy of the measurement can be influenced by factors such as the electrical conductivity of the substrate and the surface roughness of the lining.

Destructive Testing Methods

Cross - Sectional Analysis

Cross - sectional analysis involves cutting a small sample from the PTFE - lined tank and examining it under a microscope. This method provides a direct and accurate measurement of the lining thickness. The sample is carefully prepared by cutting it perpendicular to the surface of the lining, and then it is polished to reveal a clear cross - section.

Under the microscope, the thickness of the PTFE lining can be measured using a calibrated scale. This method also allows for the inspection of the bonding between the lining and the substrate, as well as the detection of any internal defects or inhomogeneities in the lining.

However, cross - sectional analysis is a destructive testing method, which means that it cannot be used on in - service tanks without causing damage. It is usually used during the manufacturing process for quality control purposes or in cases where a detailed analysis of the lining structure is required.

Regular Inspection and Monitoring

Regardless of the testing method used, regular inspection and monitoring of the PTFE lining thickness are essential. For new tanks, it is recommended to perform initial thickness measurements at multiple points on the lining to establish a baseline. During the service life of the tank, periodic inspections should be carried out to detect any changes in the lining thickness over time.

The frequency of inspections depends on various factors, such as the type of chemicals stored in the tank, the operating conditions (temperature, pressure), and the expected service life of the lining. In general, more frequent inspections are required for tanks that are exposed to harsh chemicals or extreme operating conditions.

Choosing the Right Testing Method

When choosing a testing method for checking the PTFE lining thickness, several factors need to be considered. These include the type of tank substrate (conductive or non - conductive), the accessibility of the lining surface, the required accuracy of the measurement, and whether the tank is in service or under manufacturing.

For in - service tanks where non - destructive testing is preferred, ultrasonic thickness gauging is often a good choice as it can be used on a wide range of substrates. Eddy current testing is more suitable for conductive substrates and can provide rapid results. If a detailed analysis of the lining structure is needed, cross - sectional analysis can be used during the manufacturing process.

Our Products and Services

As a PTFE lined tanks supplier, we offer a wide range of PTFE Lined Filter Housing, PTFE Lined Equipment, and PTFE Lined Measuring Tank. We ensure that all our products meet the highest quality standards, and we use advanced manufacturing techniques to achieve the optimal PTFE lining thickness.

We also provide comprehensive inspection and testing services to our customers. Our team of experienced technicians can perform both non - destructive and destructive testing methods to ensure the quality of the PTFE lining in your tanks. Whether you need a one - time inspection or regular monitoring, we can tailor our services to meet your specific requirements.

Conclusion

Checking the thickness of the PTFE lining in tanks is a critical aspect of ensuring the safety and performance of the tanks. By using appropriate testing methods and conducting regular inspections, you can detect any potential issues early and take timely measures to prevent lining failure.

If you are interested in our PTFE lined tanks or our inspection and testing services, please feel free to contact us for further discussion and procurement negotiation. We are committed to providing you with high - quality products and professional services.

References

  • ASTM International. (Year). Standard test methods for non - destructive measurement of dry film thickness of non - magnetic coatings applied to a magnetic base metal. ASTM D7091.
  • ASNT (American Society for Nondestructive Testing). (Year). Nondestructive testing handbook. Volume 1: Ultrasonic testing.
  • ISO (International Organization for Standardization). (Year). ISO 2808: Paints and varnishes - Determination of film thickness.